O-Ring for DC2000

O-Ring for DC2000

Additional information

Weight	.10 lbs
Dimensions	7 × 4 × 1 in

Push the O-ring along its groove until it lifts. Do not use tools or sharp objects to remove the O-ring to avoid damaging the soft silicone material.
Gently pull the O-ring out of its groove. Important: The O-ring and O-ring groove must be completely clean before installing the O-ring. Use a dampened, lint-free cotton cloth. A micro-fiber cleaning cloth used for cleaning eyeglasses is ideal.
Lay the O-ring over the O-ring groove making sure the O-ring is not twisted. Orient the O-ring with the more rounded corners on the hinge side of the housing.
Gently push the O-ring down into the groove. The O-ring should be evenly seated in the groove.
Close the housing door to firmly seat O-ring and open housing again to inspect that O-ring is completely seated into groove. Be careful that there are no obstructions, like the wrist strap, trapped between the housing door and O-ring.

Free Ground Shipping
on All $50+ USA Orders!

In Stock

$14.95

Replacement O-ring for SeaLife DC2000 underwater camera

Free Ground Shipping on All $50 + USA Orders

Shop with an Expert.
We’re here to help.
Phone: 856-866-9191
Toll Free: 800-257-7742 (USA Only).

O-Ring for DC2000

Free Ground Shipping
on All $50+ USA Orders!

In Stock

$14.95

Replacement O-ring for SeaLife DC2000 underwater camera

Weight	.10 lbs
Dimensions	7 × 4 × 1 in

Push the O-ring along its groove until it lifts. Do not use tools or sharp objects to remove the O-ring to avoid damaging the soft silicone material.
Gently pull the O-ring out of its groove. Important: The O-ring and O-ring groove must be completely clean before installing the O-ring. Use a dampened, lint-free cotton cloth. A micro-fiber cleaning cloth used for cleaning eyeglasses is ideal.
Lay the O-ring over the O-ring groove making sure the O-ring is not twisted. Orient the O-ring with the more rounded corners on the hinge side of the housing.
Gently push the O-ring down into the groove. The O-ring should be evenly seated in the groove.
Close the housing door to firmly seat O-ring and open housing again to inspect that O-ring is completely seated into groove. Be careful that there are no obstructions, like the wrist strap, trapped between the housing door and O-ring.

Free Ground Shipping on All $50 + USA Orders

Shop with an Expert.
We’re here to help.
Phone: 856-866-9191
Toll Free: 800-257-7742 (USA Only).